Technical information
Several colour mixers, that are positioned within a range of 15 m, can be controlled with one remote control. One colour mixer must then be defined as master. The distance between the master colour mixer and the other colour mixers (slaves) must not exceed 15 m.
1. Synchronise all colour mixers with the remote controlA. Unplug the colour mixers from the mains for at least 5 sec. (pull power plug).B. Reconnect the colour mixers to the mains (plug in power plug).C. Peel off the foil from the battery hold of remote control; the battery can remain in the battery hold.D. Push the button (recessed in the centre) of all colour mixers that need to be programmed. The button is illuminated in blue after actuation.E. Push ON/OFF button of remote control for approx. 15 sec. The configuration was completed successfully if the buttons of all the respective colour mixers flash once. Repeat step D and E in case some buttons did not flash.
2. Definition of the master colour mixerPush the button of the respective colour mixer for approx. 5 sec. The button is illuminated in blue for as long it is being pushed. The definition is completed if the illuminated button switches off. The button flashes continuously and rapidly blue after release.
3. Definition of a new master colour mixerFollow instructions as described in item 2. The initial master colour mixer will automatically change to slave.
4. RemarksA. If the remote control does not work for longer than 1 minute, it is in sleep mode. In this case, please push the ON/OFF button of remote control in order to re-establish the connection.B. All colour mixers must be connected to the mains for at least 1 min. in order to store the colour settings.
