The new frame fastener Startec Frame Fix
Simple thing - Clean frames in short time.
The Häfele frame fastener Startec Frame Fix enables quick, easy and environmentally friendly door assembly and disassembly for wooden wrap-around frames - without the need for environmentally harmful assembly foam.
Home Own assortments Startec Frame Fix
THE CLEAN ALTERNATIVE
Why we rethink frame fixing .
Mounting foam, filling material, screws, ready ... or?
The standard fixing of wooden frames seems simple, but requires special tools, skill, experience and often a lot of time and sometimes rework. Moreover: assembly foam is harmful to health and the environment, is cumbersome to dispose of and makes dismantling and recycling more difficult. Häfele has therefore developed a comprehensively clean alternative.
Startec Frame Fix is a simple, mechanical fastening that makes life easier for installers. Without installation foam, the construction site, air and environment remain clean and free of harmful substances. At the same time, users appreciate the fact that the system can be subsequently adjusted and easily dismantled. Häfele offers with the innovative and practical installation a …
… simple thing: clean frames in short time.
Simple, clean, done.
All advantages at a glance: What makes the Frame Fix better? Here are six good reasons to dispense with assembly foam and install the door frames mechanically instead.
Very easy installation: The installation of Frame Fix is done in a few steps and is self-explanatory. Even without specific training, you can avoid classic installation mistakes with door frames.
Finished means finished: After assembly, the door is immediately loadable and ready for use - problems with foam pushing back are a thing of the past!
Small toolbox: you need few tools, no wedges and spreaders. Elaborate cleaning work bleiben Ihnen erspart.
Firm remains firm: temperature, air and wall humidity no longer have a negative effect on your installation.
Easily adaptable and demountable:The system can be adjusted three-dimensionally - even retroactively. Removal is just as easy as installation.
Clean for all of us: Frame Fix does not pollute the environment or your health. You no longer have to collect PU foam cans and dispose of them later.
Small toolbox
You need few tools, no wedges and spreaders. You are spared time-consuming cleaning work.
Einfach, sauber, fertig.
Alle Vorteile auf einen Blick: Was macht den Frame Fix besser? Hier finden Sie sechs gute Gründe, auf Montageschaum zu verzichten und die Türzargen stattdessen mechanisch zu installieren.
Sehr einfache Montage: Der Einbau von Frame Fix ist in wenigen Schritten erledigt und erklärt sich von selbst. Auch ohne spezifische Ausbildung können Sie klassische Einbaufehler bei Türzargen vermeiden.
Fertig heißt fertig: Nach der Montage ist die Tür sofort belastbar und gebrauchsfertig – Probleme mit nachdrückendem Schaum sind passé!
Kleiner Werkzeugkasten: Sie benötigen wenig Werkzeug, keine Keile und Spreizen. Aufwändige Reinigungsarbeiten bleiben Ihnen erspart.
Fest bleibt fest: Temperatur, Luft- und Mauerfeuchtigkeit wirken sich nicht mehr negativ auf Ihre Montage aus.
Leicht anpassbar und rückbaufähig: Das System ist – sogar nachträglich – dreidimensional verstellbar. Der Ausbau ist ebenso einfach wie der Einbau.
Sauber für uns alle: Frame Fix belastet weder die Umwelt noch Ihre Gesundheit. Sie müssen keine PU-Schaumdosen mehr sammeln und später entsorgen.
Kleiner Werkzeugkasten
Sie benötigen wenig Werkzeug, keine Keile und Spreizen. Aufwändige Reinigungsarbeiten bleiben Ihnen erspart.
MINIMAL EFFORT
How it works.
The wall opening should be as close as possible to the standard dimension. For this reason, the use of the Frame Fix is particularly worthwhile for block frame and drywall construction..
During the conception of the Startec Frame Fix it was taken into account that end users and assemblers only need standard tools and a minimum of aids. They save themselves the purchase of rarely used accessories, up to 50 percent of the assembly time - and do not have to fear any costly rework.
The field of application of mechanical door frame fastening extends over masonry, plaster, plasterboard, tiles, wood and concrete.
The Frame Fix is made of pre-galvanized sheet steel and is based on a clamping mechanism that can be aligned and braced vertically, horizontally and laterally. Six identical elements are used per door. One element is assembled from three parts each: Base plate (1), stop bracket (2) and mounting bracket (3). Four wood screws and two threaded screws are used for fixing each element..
Find all important information in the brochure
Inspiration to browse.
Simple thing - Clean frames in a short time. In the Startec Frame Fix brochure you will find all details.
Weitere Inspiration erhalten Sie in unserer Produktbroschüre
In der Frame Fix Broschüre finden Sie alles Wichtige auf einen Blick.
Startec Frame Fix im Onlineshop
Interesse geweckt?
Dann jetzt den Startec Frame Fix im Onlineshop entdecken und bestellen.
Der Häfele Frame Fix eignet sich für Innentürzargen aus Holz.
Derzeit deckt der Häfele Frame Fix Wandstärken von 125 - 165mm ab.
Weitere Informationen finden Sie hier: Zur Katalogseite
Der Häfele Frame Fix eignet sich für Holzumfassungszargen im Innenbereich sowie die Montage in druckfesten Laibungen aus Mauerwerk, Putz, Beton, Holz, Gipskartonplatten und Fliesen (mit Fliesenschutzprofil).
Weitere Informationen finden Sie hier: Zur Katalogseite
Bei einer Zargenhöhe von 2,0 m kann eine Abweichung von bis zu 9 mm ausgeglichen werden. Weitere Toleranzen in Bezug auf das Öffnungsmaß entnehmen Sie bitte den Katalogseiten.
Nach sachgerechter Montage hält der Häfele Frame Fix einem Türgewicht von < 40kg stand. Eine Verleimung der Zierbekleidung ist generell zu empfehlen.
Grundsätzlich gilt, dass die Beschaffenheit der Wand den auftretenden Kräften des Alltagsgebrauchs von Türen standhalten muss. Weiterführende Informationen finden Sie in der DIN 1053-1.
Der Häfele Frame Fix ist nach DIN EN 1191 auf Dauerhaftigkeit (Klasse 4, 50.000 Zyklen) sowie nach DIN EN 949 auf Stoßfestigkeit (30kg Pendelschlag) erfolgreich geprüft.
Pro Zarge sind im Normalfall sechs Befestigungspunkte notwendig. Bitte beachten Sie dazu die Montageanleitung.
Weitere Informationen finden Sie hier: Zur Katalogseite
Die seitliche Toleranz zwischen Laibung und Zarge muss pro Seite mindestens 15 mm und maximal 25 mm betragen. Bei den beiden Blendrahmen ist eine Aussparung von >3 mm für Klemmbacken und Montagewinkel erforderlich.
Weitere Informationen finden Sie hier: Zur Katalogseite
Der Schallschutz einer Tür ist nach DIN 4109 von mehreren Kenngrößen abhängig. Der Häfele Frame Fix beeinflusst den Schalldämmwert einer Tür daher nicht wesentlich.
Um Preisinformationen zum Häfele Frame Fix abrufen zu können bitten wir Sie sich mit Ihrem Häfele Kundenkonto anzumelden. Sie haben bisher kein Konto für unseren Onlineshop?
Um Informationen zur Verfügbarkeit des Häfele Frame Fix abrufen zu können bitten wir Sie sich mit Ihrem Häfele Kundenkonto anzumelden. Sie haben bisher kein Konto für unseren Onlineshop?
Unique variety - browse the Häfele online store

From experience: Häfele's own product ranges
As a specialist in hardware, electrical locking systems and lighting, Häfele has been shaping the intelligent life and living of the future for 100 years. In our own product ranges, we bundle the best of our experience engineered by Häfele.
Discover Häfele's own product ranges

Something for everyone: The Häfele product world
Häfele is both your supplier and manufacturer. Choose from the uniquely wide Häfele range of over 154,000 items worldwide and get the best quality from Häfele or from strong Häfele partner brands.
Discover the Häfele product world