Rotary handle: Black, Lock case: zinc plated, chromatized, Lock case: Galvanized chromatizedrotary handle: Black
with 5 pin tumblers, With number combinations
For locker and wardrobe systems: Suitable for installation in steel doors up to 3 mm thick
Lock case: Steel
housing: Stainless steel
rotary handle: Plastic
cylinder: Brass
Opening the locker lock:
1) turn two full revolutions to the right
2) continue turning right to the first number
3) turn one full turn to the left
4) continue turning left to the second number
5) turn right to the third number
6) continue to turn to the right as far as possible
The lock opens.
Set locker lock to a different combination:
1) turn one full turn to the right
2) continue turning right and turn until you reach "0"
3) insert override key and rotate 90° to the right
The latchbolt is retracted.
4) open door
5) press and hold button on back of lock case
6) turn rotary knob to the right by two graduation lines to "48"
7) release button on back of lock case
8) turn rotary knob to the right until the adjusting spring audibly engages
9) remove override key
A document included in the scope of delivery specifies 5 combinations. If the combination is changed as described here, the next preset numeric combination is set.
The locker lock can be opened in two ways:
With combination lock: Each lock is pre-set for 5 combinations that can be selected using the override key. The lock combinations are not based on related row combinations and therefore cannot be predicted.
With override key (cylinder with 5 pin tumblers): The override key opens the lock irrespective of the set number combination.
