LED strip light with PUR encapsulation, LED 1160 24 V 4-pin (RGB), 120 LEDs/m, 18 W/m, IP67

  • CAD data available.
    Please select an article to view.
  • Technical documents available.
    Please select an article to view.

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

LED strip light with PUR encapsulation, LED 1160 24 V 4-pin (RGB), 120 LEDs/m, 18 W/m, IP67

  • see key

    X = length of integrated cable connection, 27.5 mm
    Y = safety clearance, 10 mm recommended
    C = cut length, 50 mm

    Total length = multiple of the cut length C + X + Y

83303140 product photo
83303141 product photo
Product details

Polyurethane encapsulation (IP67) for the most severe mechanical and climatic stress

Light colour

RGB

Nominal voltage

24,00 V

Wattage/m

18,00 W

Max. strip length (visual)

5,00 m

Dimmable

yes

Area of application

Bathroom (zone 1), Sauna (zone 1), Stairs with steps, Covered outdoor areas

Version

PUR encapsulation, load-resistant

Material

Plastic

Colour

White

Strip height

15,00 mm

Section length

50,00 mm

Number of LEDs/m

120

Life time

L70 36000 h

Routing width

15,70 mm

Routing depth

15,50 mm

Degree of protection

IP67

Installation

For clipping into retaining clip, For recess mounting in milled groove

Installation note

cut the LED strip light to size:
The total illuminated length of the LED strip light is always a multiple of C + cable connection X + safety distance Y. The Y area does not illuminate (if strip section C is cut into, it no longer illuminates). However, the PUR encapsulation ensures that there is a soft transition of light into the non-illuminated area.
1. Calculate strip length
2. Cut at Y with a generous safety allowance
3. Connect LED strip light and mark the last illuminated section C on the illuminated LED strip light.
4. Unplug strip light.
5. The safety allowance can be minimised by approximation if required. Always unplug the LED strip light when cutting!
6. Close off the open strip section with a suitable silicone sealant

Cable length

350,00 mm

Order reference

Please order lead separately. Colour control via 6-way distributor Häfele Connect Mesh (current carrying capacity 5 A) with RGB adapter and remote control or smartphone. Please order separately. Installation of the free Häfele Connect Mesh app is required.

Supplied with

1 LED strip light with 2 x 0.35 m lead (1 each on the left/right of the strip)

Additional information attributes

The maximum output of 18 W/m has been measured using a Häfele Connect Mesh distributor. Please use a 6-way distributor with current carrying capacity 5 A.

The following applies to bio-saunas and steam baths: Tested and approved up to 70 °C ambient temperature with 36,000 hour life time and degree of protection IP67.
Note IP degree of protection of used driver! Only install drivers and leads in permissible zones.

Maximum strip length (visual) describes a strip section with a visually imperceptible drop in luminous flux of max. 30%.
Please note: An immediately following strip light section with a new infeed is noticeably brighter. Max. wattage-dependent strip length on the driver, see technical data for LED strip lights.

Complementary products and accessories
Häfele SE & Co KG, Adolf-Häfele-Str. 1, 72202 Nagold, Deutschland
Tel: +49 (0) 74 52 / 95 - 0, Fax: +49 (0) 74 52 / 95 - 2 00, E-Mail: info@hafele.com.de
24.05.2025